2 1/2" alloy pipe

**celicapain** · 26-03-2008, 03:40 PM

howdy happy toymodders
Just wondering if anyone know a good place to get 2.5 inch od straight alloy piping for intercooler pipes, preferably somewhere in south east victoria - Ive had a look around but havn't been able to find anywhere that sells the right size in less than 6m lengths, which is a bit more that im looking for(about 5.8m to much in fact)
thanks,
jun

**big_zop** · 26-03-2008, 03:55 PM

if you only need a small amount, have a look at places for offcuts - they might even give them to you for free or at least a pittance.

Also, what have you used to search and are you looking for Aluminium or Steel Alloy and would it need to be welded to youre exisiting piping?

**manny** · 26-03-2008, 03:57 PM

If you can't find any in Victoria, try Chromend in Windsor on 02 4588 5089 - they'll post/transport as required.

**celicapain** · 26-03-2008, 05:59 PM

Im looking for aluminium piping, and its to be welded to my intercooler. i dont need anyone for the welding cause ive got a mate lined up to do the work for me.
So far ive gone through the yellow pages, talked to the smorgans, asked at AVO and talked to a few exhaust places so this isn't my first try(why is always the easy things that are so difficult)

**af300e** · 26-03-2008, 06:07 PM

I use capral in Brighton drive/st/rd? Dandenog. They are very accomodating with their minimum lengths and their prices are good. I bought a piece of 100mm pipe, 3mm wall thickness in a 1m length (they cut it) and it was less than $25. Otherwise I would have had to have bought a 3m length from Action aluminium at $97 in greens rd (don't go there, dearer and shit stock range).
I also need some 2.5" aluminium pipe, when do you need yours?

**RO11LR** · 28-03-2008, 11:04 AM

try ebay , i got a couple off there a few moths ago

**abently** · 28-03-2008, 01:51 PM

Ebay++;

You'll be able to get the 1.6mm wall thickness gear from there.

No point getting 3mm thick Alloy piping if 1.5mm Mild steel is going to be lighter.

**celicapain** · 28-03-2008, 03:16 PM

weight isnt the issue, more the fact that its gotta be welded to an intercooler core, would prefer thicker walled tubing because i gotta weld it. ill have a poke round on ebay
cheerz