ae71 non ps r+p and crossmember needs to be used with an a60 non ps column.
the column needs to have the passenger side mounting wing cut down by 12mm then rewelded and braced (you may have to move the alloy plates in it back or forth by 10mm but i cant remember exact figures) and the base plate that bolts to the firewall needs a few bends added and 4 new holes drilled and rivnutted.
a60 column shroud needs to be used and there will be a fair bit of trimming required on the top part to clear the dash.
the barrels dont interchange so get it rekeyed ($40) by a locksmith.
change over the combo switches which requires 4 bolts and 5mins of your time. or rewire to suit if you so choose.
the lower section between the 2 unis may require a slight lengthen via the rubber isolater depending on where you mounted the x member.
you may also be able to use ta22 steering arms to get abit more lock out of it but i know what it does to bumpsteeer etc as i havn't done it (heard it from bigworm)
any more Qs just ask.
fairly simple job but it does require some thought.
cheers
linden
Bookmarks