1JZ Flywheel bolts

**Pimpin_1JZ** · 11-03-2008, 03:24 PM

Hi,

I am looking for the genuine part number for some 1JZ flywheel bolts as I need some new ones as my others would no doubt be past their use by date.

Thanks in advance,
Adam

**Smokey228** · 11-03-2008, 03:36 PM

I got them at home, i'll send em across when i get there unless someone beats me to it...

Although i just called into my local toyota and they were able to find them out... Have you tried that?

**Norbie** · 11-03-2008, 03:47 PM

Note the bolts are different for auto or manual so you might want to specify that.

**Pimpin_1JZ** · 11-03-2008, 03:49 PM

Oops it is a manual. Well everytime I go to Toyota to order something they always ask if I have the vin # etc etc. But it is in a MZ20 so I don't have anything to go off.

**Smokey228** · 11-03-2008, 04:26 PM

Mines in a ra23. So i have not hope of helping them. But it has never stopped them. Just go in say its a 1jz from a JZA70 (plus whatever else they came out with in a manual turbo)

And then they can go through the import catalouge and find it!
Only time i had no luck was looking for a temp switch to suite a ra23...

Cheers,
Jase

**takai** · 11-03-2008, 04:38 PM

Buy a set of ARP bolts for a 4AGE.
They are cheaper and higher quality than the stock Toyota items.

The bolt dimensions are exactly the same.

**Pimpin_1JZ** · 11-03-2008, 04:44 PM

Ah now that's the stuff I was after! I originally tried getting a set of ARP's for a 1JZ, they sent me 3SGTE ones assuming they were the same but were too big. Also how many bolts does a 4AGE take? Same as a 1JZ?

**takai** · 11-03-2008, 04:50 PM

4AGE takes 8 bolts, same as the 2JZGE, so i assume same as the 1JZ. However this only applies for the W58 and the R154.
The V160 has bigger/longer bolts.

Infact here is the thread i created on it a while back: http://www.toymods.net/forums/showth...el+bolt+thread