dismantling SC12/14? tight nuts =)

[oldcorollas]

so.. when dismantling an SC12/14, the nuts that hold the gears to the shaft seem like they are not meant to come off....

how do i make them come off?

putting the lobes in a vice seems like a really bad idea, so... use a soft metal vice guard and clamp the gears themselves?
just use rattle gun with the lobes free?

of course i am assuming that putting it back together will result in no problems at all

has anyone changed the pahsing of the rotors before? is it really that big an issue? (ass-u-ming there are even number of teeth on the gears?

[Ben Wilson]

I just used a rattle gun and went for it.

Step by step instructions with pictures

[IN 05 NT]

pictures old rollas being flung away from the rattle gun as he squeezes the trigger bahahaha

rattle gun = 1
old rollas = 0

can i be on your ignore list now?

[oldcorollas]

pictures old rollas being flung away from the rattle gun as he squeezes the trigger bahahaha

rattle gun = 1
old rollas = 0

can i be on your ignore list now?

Thanks for the step by step! (bugger, forgot login)

hmm... interesting visual image......
nahh, you don't generally say stupid things, so you can stay unignored

i have access to leccy rattle gun and big hammer.....
will see what happens

[bmak]

Rattle gun did it easy for me.

[damo101]

3/4inch rattle gun

[oldcorollas]

rrrrattle gun it is then!

tanks guys

[Ben Wilson]

Thanks for the step by step! (bugger, forgot login)

OK then:



and



Might help

[oldcorollas]

oh... you do them first?

bugger might reassemble and take em off

[Ben Wilson]

Nah - It's just sitting back together to give me a 'handle' to stick in the vice..

Look at the first picture, you'll notice that there is only 1 bolt in there.