Results 1 to 12 of 12

Thread: 1jz Oil Pressure what should it be

  1. #1
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    94

    Default 1jz Oil Pressure what should it be

    Just wanted to check something, when I start my car oil pressure sits at 80psi at idle move off idle and the oil pressure rises to 100, once the car warms up abit it drops back to 40-50 and comes up to 60-70 under load.
    Anything that I need to look at or is this a common 1JZ thing, i currently run a remote oil filter with guage sender in the side of this

  2. #2
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    94

    Default Re: 1jz Oil Pressure what should it be

    someone? anyone?

  3. #3
    Forum Sponsor Conversion King
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    2,583

    Default Re: 1jz Oil Pressure what should it be

    seems abit high while cold but it may be due to oil viscosity. what oil do you run and what weights?

    once hot seems fine.

    cheers
    linden
    Quote Originally Posted by WHITCHY
    Prefer someone around the Sydney area but will travel a few hours for a good box!

  4. #4
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    94

    Default Re: 1jz Oil Pressure what should it be

    10w40 semi syn

  5. #5
    Forum Sponsor Conversion King
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    2,583

    Default Re: 1jz Oil Pressure what should it be

    sounds about right, shouldnt have that much pressure at cold idle though.

    have you checked the pressure relief valve and spring?

    cheers
    linden
    Quote Originally Posted by WHITCHY
    Prefer someone around the Sydney area but will travel a few hours for a good box!

  6. #6
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    94

    Default Re: 1jz Oil Pressure what should it be

    where and how?any pic or description as to what I am looking for? spring lenght ? still alot to learn about this engine

  7. #7
    Junior Member Grease Monkey
    Join Date
    Oct 2007
    Location
    NSW
    Posts
    60

    Default Re: 1jz Oil Pressure what should it be

    I know that with my 7m, when I start my car the presure goes to 50 at idle then drops down to about 20 when it gets warm then 50 when under load.

  8. #8
    RIP Scott Kalitta Automotive Encyclopaedia Mr DOHC's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    1,234

    Default Re: 1jz Oil Pressure what should it be

    pretty well stock, at 550rpm idle on mien its still at 25 psi, over 100 on cold idle, no idea what cause mine only goes to 100
    JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58

    The boobs are back

  9. #9
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    94

    Default Re: 1jz Oil Pressure what should it be

    Quote Originally Posted by Mr DOHC
    pretty well stock, at 550rpm idle on mien its still at 25 psi, over 100 on cold idle, no idea what cause mine only goes to 100
    So yours does the same? that puts my mind at ease

  10. #10
    is a semi-motivated Domestic Engineer 1JZ~lux's Avatar
    Join Date
    Oct 2006
    Location
    QLD
    Posts
    593

    Default Re: 1jz Oil Pressure what should it be

    My 1JZ-GTE when I start my car oil pressure sits at 90 - 100psi at idle move off idle and the oil pressure rises to over 100, once the car warms up a bit it drops back to 60 - 80 and comes up to 90 - over 100 under load. My gauge is currently a s#!tty Matrix so I think the readings are wrong. I'll be buying some better quality gauges as soon as I can but not before Christmas.
    Petrol is for washing parts, alcohol's for drinking but NITRO IS FOR RACING!
    My pictures, Returning some time in the distant future.
    RN85 Hilux + 1JZ-GTE = 298.0HP @ 14PSI -- 60' 1.956 ET 13.775 MPH 99.49
    Project Korruption - Stage 1: The Resto. KE35 Corolla Hardtop daily driver

  11. #11
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: 1jz Oil Pressure what should it be

    Yeah I see over 100psi on cold idle with my 2JZ.

  12. #12
    is a semi-motivated Domestic Engineer 1JZ~lux's Avatar
    Join Date
    Oct 2006
    Location
    QLD
    Posts
    593

    Default Re: 1jz Oil Pressure what should it be

    Well it's good to hear that it appears to be normal. I guess I'll buy a gauge with a bigger range when I replace the crappy one I have now.
    Petrol is for washing parts, alcohol's for drinking but NITRO IS FOR RACING!
    My pictures, Returning some time in the distant future.
    RN85 Hilux + 1JZ-GTE = 298.0HP @ 14PSI -- 60' 1.956 ET 13.775 MPH 99.49
    Project Korruption - Stage 1: The Resto. KE35 Corolla Hardtop daily driver

Similar Threads

  1. Stock fuel pressure on 2JZ and 1JZ
    By 2JZR31 in forum Tech and Conversions
    Replies: 34
    Last Post: 21-03-2007, 10:02 AM
  2. 1jz to 2jz
    By HIZOKU in forum Tech and Conversions
    Replies: 35
    Last Post: 30-11-2006, 07:52 AM
  3. 1jz and Haltech e6k
    By OldCel77 in forum Tech and Conversions
    Replies: 11
    Last Post: 10-10-2006, 05:25 AM
  4. Tappet Pressure how much is too much ?
    By Mr Multivalve in forum Tech and Conversions
    Replies: 14
    Last Post: 03-05-2006, 10:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •