1ggte aftermarket coils/computer and c.a.s which leads go where???

[J0RD0]

sounds like its running on 4 cylinders, im out of ideas to find which leads go where?

[hosking1991]

1-5-3-6-2-4 im pretty sure any one confirm

[J0RD0]

I need confirmation on that! can anyone go to their car and check?

[FASTFOO]

All Toyota straight 6's are 1-5-3-6-2-4
100% that is what it is on a 1G

Regards
MATT.

[J0RD0]

all sorted thanks guys

[Snyper]

follow the distributor cap..

[J0RD0]

follow the distributor cap..

it runs a crank angle sensor with aftermarket coils + leads run on a motec, I had the leads marked but the ink came off.

[J0RD0]

ok now ive got the thing driving it sounds like it only runs on 4 cylinders, on idle its hard to tell if its right or not because of the cams. Now as stated above i run aftermarket coils/computer and a crank angle sensor, is anyone able to tell me how to diagnose a problem like this? + to make it more difficult there is only 3 coils

[The Real Roadrunner]

output 1 to coil for 1-6, output 2 to coil for 2-5, output 3 to coil 3-4.

make sure the coils and leads are grouped as above or you will have a miss (and probly run on 4 like yours)

check leads first then trace the wires back to the ecu.

diagrams can be found on the motec site.

cheers
linden

[Matt-AE86]

Maybe you could use some mathematics to sort it out

6 cyls, 6 leads

1 2 3 4 5 6

1 2 3 4 5 6

6 5 4 3 2 1

And so on.. but you would probably end up with more than 100 possibilities..

[J0RD0]

problem sorted

[The Real Roadrunner]

Maybe you could use some mathematics to sort it out

6 cyls, 6 leads

1 2 3 4 5 6

1 2 3 4 5 6

6 5 4 3 2 1

And so on.. but you would probably end up with more than 100 possibilities..

WTF

firing order is 1 5 3 6 2 4 why would you hook it up any other way?