I'm chasing someone with a factory workshop manual and/or sales brochure for the ST165. I am chasing this info to finish off an article I'm writing on tuning 3SGTE. I have all the info for later gen 2 & 3 engines which I work on all-day, everyday, but missing this for the early 1st gen ones:
Injector flow info . found in manual under "testing injectors" it specifies the allowable flow rates when tested for 15 seconds
Fuel rail pressure regulator info . found in manual under "testing regulator" it specifies the allowable pressures with the manifold pipe connected and disconnected.
power/torque values. only found in sales brochures or road tests. I would like power and torque. usually specified as "??kw @ ???rpm EEC-nett". this is the value when tested on an engine dyno with ancillaries like alternator connected.
many thanks, Terry
Terry - http://www.celicatech.com/imagearchi...lltrac_bgb.php
It is the American manual, I don't imagine they would be too different.
ST185 GrpA #116
ST165 GT4 Project Car - Soon with v6 goodness.
The glass is neither half empty nor half full, rather the glass is twice as big as it needs to be.
Bookmarks