Intercooler advice - 7mgte

[1200det]

The largest let down on the standard 7M intercooler setup is the rubber and plastic piping , Going to full hard pipes makes a massive difference but having said that if your going to get hard pipes made up you might as well go for a aftermarket cooler.

If your going the Lex/550/SAFC combo and Hi-flo you could be seeing up to 20psi no probs if tuned correctly so you would be choking the standard Cooler etc

.

[Kedderz]

Will stock ignition handle 20 psi and just a fuel computeR?
I was figuring 15 psi would be the limit before i need to start thinking after market.

[BlackSupra]

my stock coils handle 27psi.

you will need to look at spark plugs though.

My suggestion is always going to be to use an aftermarket ecu, even if it is a microtech.