JZA80 cam breather 90 degree pipe thingy

[Draven]

Hey all,

Linden is currently building me a very shiny catch can, but to hook it up properly I'm looking for a pipe with a 90 degree bend in it to go into the passenger side cam cover.

This cover has a PCV valve type thing that is usually just hooked straight to the plenum, which unfortunately means that without a 90 degree bend in that fitting, the pipe to the catch can will be crimped. Any suggestions on what might fit in this hole?

[brett_celicacoupe]

i had to do something ghetto with mine to get a vacuum supply. my GTE manifold had no vacuum port for the brake booster. anyway thats another story.

im sure pirtek would have a bling-brass 90deg bend of the right diameter for $5

alternatively you could try a 1JZ PCV outlet tube as they come with a 90deg bend from factory.

it can be seen halfway back on the passenger side in this random pic

http://img322.imageshack.us/img322/5039/img02477ht.jpg

[Draven]

AWESOME
I thought the 1jz had the bend, but wanted to make sure. that's perfect, thanks Brett. Would rep you again, but can't

[LeeRoy]

I was going to say get a speedflow fitting but i realised that you wanted just a pipe. Seems as though the one above is the right thing for the job too. If it isnt you could always scavenge through the hose bin at supercheap.