2.2 litre 1G Stroker kits

[Kedderz]

thats because you did it wrong ;-)

+how cool would a twincharged ra23 be.....

[Rcubed]

thats because you did it wrong ;-)

+how cool would a twincharged ra23 be.....

so ... the plans become evident!!!???

yeah and... 1jz = a fuck load cheaper!!!

and a fuck load heavier and bigger and more front axle weight.

i don't know why i feel compelled to state the obvious especially as i can't afford either option as long as i have missus [see avatar]. avatar may need to change

[timbosaurus]

You're missus looks like pam anderson in that photo

[Kedderz]

Next beer o clock im booking justin in for a theory session on how to manage the cut over of SC -> Turbo.

[JustenGT8]

Next beer o clock im booking justin in for a theory session on how to manage the cut over of SC -> Turbo.

No need, just run one thru the other (turbo thru SC)...and for the deaf dunderheads that keep on asking 'but won't that restrict the turbo?'...not more than the engine would have anyways so effectively NO it farking won't

[Kedderz]

problems I have there is the piping involved, theres very little room to plumb everything in thus a sc -> turbo setup would of been simpler in regards to plumbing only.

[groupasupra]

yeah and... 1jz = a fuck load cheaper!!!

and a fuck load heavier

[SillyCarS]

http://au.youtube.com/watch?v=puA6M0...eature=channel

i rest my case

[groupasupra]

http://au.youtube.com/watch?v=puA6M0...eature=channel

i rest my case

I have to be fair my mkii 5m wont do that lol my 1g would have

[SillyCarS]

<<<<<<< i have a 1g in this thing with a gt30 on it, i reckon that'll be all the power i need

mind you a motor that revs to 10 grand is something else, just not within my budget. i would have to go the 1j route. although lately i have been dreaming of a v8

[groupasupra]

yep i have a 1uz waiting to go in my mkii

my 1g narrowbaody ran a to4e with a group a compressor wheel 77mm exducer cold and was making 500 fw at 1.6 bar and it made 1bar from 4600ish 1.6 bar at 5k to 8000 and it was brutal that was running a link g3 lem

[6BOOST]

Hi People,

Sorry for the very lengthy delay in updates, its has been a very stressful and busy time in months past, and unfortunately pet projects get put on the back burner.

For the 3 of you that made deposits for your stroker kits, I think you all paid $600, the rods have been finished and in my cupboard for a few months now. As I have stuffed you around on build time, I am ging to pass the rods onto you at no extra cost, taking the loss as part of my punishment for stuffing you around, and I have arranged Jamie at forcedfed performance to help you all out with any parts needed to complete the engine, he can arrange pistons, bearings and studs should you need them.

If you get together and buy the pistons at the same time, you should get them cheaper, I'll converse with jamie about what is needed and go from there. Could anyone involved please email him on [email protected], and tell him your part of the group buy and go from there. Not to pass the buck, I work closely with jamie and he has faster access to parts such as bearings, and a little more time up his sleeve to get this all sorted for you asap.

If anyone has any problems with this, please call me on 0410 730 598, or email me on [email protected], I'd like to make sure everyone ends up happy in the end.

Regards.............................Kyle

Ps, my HKS stroker is for sale as well, check the for sale section.

[love ke70]

just sent you an email kyle, does this mean the pistons have not been ordered or made?
cheers, andy

[groupasupra]

kyle i have emailed you but had no reply on this one
i have made the decision that i would like my money back now as its been nearly 2 years mate sorry to inconvnience you if you could contact me so we can arrange this thanks steve

[celicapain]

Also paid deposit and waiting,I understand that while the group buy thing went a little belly up somethings gotta happen with either parts being sent or deposits being refunded