You need:
Flywheel, and flywheel bolts
clutch
spigot bearing
pedal box
clutch master cyl
clutch slave cyl
clutch fixed line
clutch flex line
clutch line mounting bracket (L shaped, available new from Toyota for about $6... get an RA40/60 one, or I could have a look at home at the part number)
reverse light switch cable
Bellhousing bolts
Aside from that, things that will fit are:
tailshaft
gearbox xmember and mount
starter motor
Things that need modifying:
transmission tunnel hole needs to be cut forward to allow the shifter through
Centre console will need a boot over it... the hole will be a bit forward, but the stick will still go through it and its liveable.
The two wires that go to the neutral start switch need to be plugged together.
Everything else which is connected somehow to the auto is superflous and can be left there unplugged (light for the shifter, pulley for the kickdown etc)
Bookmarks