hey all - need big help with flywheel -> pres. plate bolts

[VeeP]

hey all,
in regards to 1JZ and R154 with standard pressure plate and factory flywheel
tryin to get this manual conversion done but iv got the wrong bolts to mate the flywheel to the pressure plate (shithouse generic grade 8.8 ones when i need proper automotive ones i think). Ithink the right ones might be** part number 90119-08302 ** but i dont fuckin know if thats right?!?! and apparently the ones i need arent even in stock in any toyota dealer in oz? is anyone able to get me some REAAL soon or know where i can get em from? pplllzzzz!!
cheers ppl

[EldarO]

apparently 4AGE ones are exactly the same?

i know a few people on here know for sure though!

[airfireman1]

have you tried giving JUST TOYOTA wreckers a ring. They should be able to sort something out. They are in Malaga and the guy to ask for is TAO. He has always been able to help me out with bits and pieces. They have a range of import motors and such and should have some bolts to suit.
Cheers Dave

[EldarO]

here:

http://www.toymods.net/forums/showthread.php?t=28046

same as 4A.

and malaga just toyota are fuckheads.

[Dale]

90910-02103
suits jzx90 with 1jzgte (I believe they had r154's?)

they suit 1zz and 2zz as well as 1jzgte so toyota australia should have plenty in stock

edit: btw the part number you quoted in your original post doesn't exist

and also has anyone used 4age bolts in a 1j? The EPC has different part numbers for them

[VeeP]

thanks but i already have flywheel bolts for a 1JZ (ARP items) -

i want FLYWHEEL TO PRESSURE PLATE . . . . not flywheel to crank

btw just for interest sake

1jz flywheel bolts = BA XR6 flywheel bolts = 4AGE flywheel bolts!!!! truly!!

but i digress, i desperately need flywheel to pressure plate bolts!!

anychance i can take one i got and go to conventrys and get em matched up? i think i need grade 10.5 bolts

[Dale]

Whoops sorry, should read more closely huh

90119-08302

That's the part number for a single bolt, it's a standard part, should cost SFA!

[EldarO]

thanks but i already have flywheel bolts for a 1JZ (ARP items) -

i want FLYWHEEL TO PRESSURE PLATE . . . . not flywheel to crank

btw just for interest sake

1jz flywheel bolts = BA XR6 flywheel bolts = 4AGE flywheel bolts!!!! truly!!

but i digress, i desperately need flywheel to pressure plate bolts!!

anychance i can take one i got and go to conventrys and get em matched up? i think i need grade 10.5 bolts

oh my bad, complete brain fart!

[Rex_Kelway]

Most Allen-Head cap screw are 10.5 grade. just use them, Rex suggests.

You can really use any bolts, just make sure they are of a suitable grade.