3SG ST202 engine into ST162

**terryo** · 10-04-2008, 07:48 PM

does anyone have a full or partial wiring diagram for a ST202 with 3SG (plain Gen 3 engine, not beams). the computer is not the same as MR2. net search has only revealed US market 5SF engine stuff. Its going into a St162

**horse** · 11-04-2008, 01:51 AM

http://www.toymods.net/forums/showthread.php?t=5108
does that help any?

i've got SW20 wiring diagrams if u need them. no ST202 ones sorry

**terryo** · 11-04-2008, 07:39 PM

not really of help, but thanks. I knew all that stuff. I just want wiring manual. I've got the MR2 , gen 3 one , but its quite different

**Cuts** · 17-04-2008, 01:00 PM

terry best bet might be 6gc.com.

ive got an account there and can put up a topic if your not signed up.

**2jzhilux** · 19-04-2008, 07:32 PM

Would an st 204 diagram help i can get one for you if it will

**terryo** · 20-04-2008, 02:46 PM

cuts
any help appreicated. thanks

2jzhilux
the 204 wiring is not the same (its 5SF engine). if you have the entire diagram, the part showing the fuse box might help me.. thanks

**Cuts** · 23-04-2008, 09:46 AM

http://www.celicatech.com/imagearchi...e/94_6gmanual/

check that one out terry, prob not exactly what your after but its got a shit load on it, in the mean time ill try and get more out of these 6gc noobs.

**mikie** · 23-04-2008, 02:55 PM

i have a few that iv found in a pdf. 5.2mb so i cant upload here.
http://www.mediafire.com/?rd41ir0inil
hope it helps

Cheers Mike

**terryo** · 14-06-2008, 07:38 PM

thanks guys, finally assembled enough info. I ended up buying a full harness in UK and then integrating the air-con stuff into that.
Along the way I did find out that the computer supplied with the engine did not match what was left of the engine harness that originally came, or the UK replacment, so it was a wire-by-wire check it job. should be running soon.