Results 1 to 6 of 6

Thread: 3SGTE starter motor issues

  1. #1
    has no Toyota anymore :( Conversion King tooch's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,385

    Default 3SGTE starter motor issues

    My starter motor has been fuxxoring up lately, basically when you turn the key, the solenoid engages but the motor either won't spin at all, or takes 5 seconds or so until it starts to spin over. The gay thing is that sometimes it will work perfectly for days, but then play up again in the morning, which makes it hard to diagnose. I pulled the actual motor part out of the starter and inspected it, seemed very clean, as did the brushes, so when I re-installed it I gave the 2 power wires on the starter unit a bit of a spray and clean, and it seemed to come good for a few days.

    But now it's started playing up again, I'm leaning towards the magnetic switch being faulty?
    I don't wanna go replacing the starter motor if it turns out to be something else though. Any suggestions on what else to check? The starter relay appears to be behaving.

  2. #2
    Touching Automotive Encyclopaedia Aust162's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    879

    Default Re: 3SGTE starter motor issues

    Are you sure this isnt' your problem tooch? it might be worth setting one up... only costs about $10 to do and it might fix your problem!

    http://toymods.net/forums/showthread...referrerid=119
    *hearts* his 4age powered KE70 Panelvan!
    Hi, Im enthused about corollas..

  3. #3
    has no Toyota anymore :( Conversion King tooch's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,385

    Default Re: 3SGTE starter motor issues

    Ok so it did it again this morning, and it seems that if I turn the key back and forth a few times then it works eventually. Wtf.

  4. #4
    has no Toyota anymore :( Conversion King tooch's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,385

    Default Re: 3SGTE starter motor issues

    Thanks for that link Andrew, I was looking for that one

  5. #5
    2JZ Nut Grease Monkey 98SZR's Avatar
    Join Date
    Jan 2007
    Location
    ACT
    Posts
    62

    Default Re: 3SGTE starter motor issues

    Maybe something also simple to check is all your earths.

  6. #6
    GT-Four Pilot Backyard Mechanic SilverGhost's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    336

    Default Re: 3SGTE starter motor issues

    Im getting exactly the same problem with my starter...i think the throwout gear isnt engaging on the flywheel properly, as when im having this problem, i let it roll a bit then engage a gear to rotate the flywheel, then it works a treat....

    im just chalkin it up to a 17 y/o old starter that could do with a rebuild

Similar Threads

  1. 3SGTE Rwd Starter motor
    By SE86 in forum Tech and Conversions
    Replies: 20
    Last Post: 28-07-2010, 06:59 PM
  2. 3K starter pinion center distance from crank center?
    By 510rob in forum Tech and Conversions
    Replies: 0
    Last Post: 14-01-2006, 09:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •