Sard fuel pressure reg

[3t-RA40]

Got my new Sard fuel pressure reg last night opened up the box and no where that I could see on the reg, the box or the instructions (non english) the flow direction of the fuel.
Anyone using one of these could you let me know the fuel flow direction.
Thanks,
Neil.

[MR 1JZ]

does the regulator have arrows on it?

[3t-RA40]

Not that I could see. Had my eyes open and everything.

[MR 1JZ]

in that case I cant help sorry...if it were a malpassi no worries as I installed one on my car no less than two weeks ago...but not with a sard mate

try posting this on nissansilvia.com as plenty of the silvia phags use them on their john deere specials (SR20) and one of the morons on there should be able to help you

[3t-RA40]

try posting this on nissansilvia.com as plenty of the silvia phags use them on their john deere specials (SR20) and one of the morons on there should be able to help you

Looks like you have a lot of respect for these guys. If they're such 'morons' I don't think I'll was my time asking them.

[MR 1JZ]

Looks like you have a lot of respect for these guys. If they're such 'morons' I don't think I'll was my time asking them.

I use the term morons loosely, there are some people that know thier shit...and for a request as simple as this someone should be able to give you the correct info

[Joshstix]

I believe when mounted with the vacuum port to the top, then the high pressure feed into the reg comes in from the side and the low pressure output from the reg goes down.

[3t-RA40]

Thanks Joshstix. I was thinking about this most of the day and the feed in through the bottom has a very small dia, something like 4mm and the one on the side is wide open.
I was thinking that the pressure in would have been the bottom
Are you +ve or should i wait and see if anyone else comes back with someting?

[1JZ.747]

I believe when mounted with the vacuum port to the top, then the high pressure feed into the reg comes in from the side and the low pressure output from the reg goes down.

neilo


josh is spot on my sard is set up this way.


maybe if you didnt masterbate so oftern you could see better?

love you, not in a gay way though

shane

[3t-RA40]

neilo


josh is spot on my sard is set up this way.


maybe if you didnt masterbate so oftern you could see better?

love you, not in a gay way though

shane

Thanks josh and shane just wanted to be sure and like i said the box it came in, the instructions and the reg its self had no flow directions.

And shane you know it's the photo of you that makes me masterbate, but not in a gay way.
hugs & kisses
Neil.