4ag 20valve article

[old_school_jap1]

hi, i used to have an adobe article titled "how to install a 4ag 20v in rwd trim properly" or something along those lines. it was an adobe document and was very very helpful. anyways my last computer is f#@ked and i am really pissed that it took that article with it. i have searched everywhere and can't find it. has anyone got it or know where it is??????

[big_zop]

I have it at home so if no one replies by tomorrow, i can send it too you. I also have a fair amount of stuff i have collected over the years, if you can think of anything else that you need, ill see what i can find.

[old_school_jap1]

thanks. if u have anythin more on blacktops and specifically putting them in ta22 celicas it would be great. i had a few wiring diagrams that also got deleted which were real good

[Hen]

I have been told by a learned mechanic that you can wire a blacktop using a silvertop diagram. The only differences are in the MAP vs AFM area and the fuel pump trigger.

So the silvertop wiring diagram and blacktop vs silvertop pinouts on club4ag should get you well started.

Hen

[skiddz]

have a look at my thread for pics of engine mounts

[oldcorollas]

I have it at home so if no one replies by tomorrow, i can send it too you. I also have a fair amount of stuff i have collected over the years, if you can think of anything else that you need, ill see what i can find.

is it small enough to be uploaded to the toyota tech library? is it in there already?

this was the one into a KE20 right? methinks it should be preserved and held on a few pages so ppl can have access

[old_school_jap1]

is it small enough to be uploaded to the toyota tech library? is it in there already?

this was the one into a KE20 right? methinks it should be preserved and held on a few pages so ppl can have access

yep thats the one, i second the notion of puttin it in the tech library. thanks everybody

[big_zop]

well, from what i can remember, it was into an AE86. unless i have the wrong article and it just has the same/similar name? will find out tomorrow then...

[old_school_jap1]

no i definitley rememba the ke20 vents in the background and the dash had a ton of birdshite on it. was a very good article wish i knew what happened to it

[oldeskewltoy]

I have it at home so if no one replies by tomorrow, i can send it too you. I also have a fair amount of stuff i have collected over the years, if you can think of anything else that you need, ill see what i can find.

Please do share........!!!!!!!

[Sam_Q]

is this any good to you?

Sam.Q's Ultimate 20V to RWD Cooling Guide

if that article is what I think your talking about then I know about it. I respect the guy for his injenuity and effort however I dont agree with drilling a hole in the back of your head.

[Screamn_Sleeka]

I think ur talking about Jonny's guide, which was called something like "how to install a 20v propery" or the right way etc.

This is his web site, quick look and i couldnt find it, but its definitely him, he did it in a AE86.
http://winterpalace.customer.netspace.net.au/

[old_school_jap1]

ya thats not the one, i definatley rememba the ke20ness and it was definately an adobe article. i think they drilled a hole in the back of the head in that article too.

[Sam_Q]

didnt anthony kellam write that? he was definately the guy who started insulting me accusing me of copying him. Unusual attitude for someone who wrote a guide to help people. I beleive this article still exists in the old toymods tech reprository

[big_zop]

ok, ive got it (email will be going out soon) and it is written by Dean Hosken and Paul Young.

here is the first pic and you can tell me if its a KE20 or AE86, its too stripped for me to tell and i cant really see the front end much.



And most of the stuff i have found has been on the net so i cant guarantee its validity and more than likely i cannot remember where i found it, unless its something obvious like Bill Sherwoods information pages. Lately, i have been putting the link in the top (i transfer them to word) so i can find it again, especially if its a forum posting.

In saying that, i do have a lot of stuff so if there anything that someone is after (be it 20V, AE86, JZXxx, and even a bit of Charade and RX-7 stuff) then pm me and i will see what i have.