t18 diff on a ra28 q's

[Smokey228]

Sorry if this is to far off topic, but you may have them to measure or might already know. But are the trailing arms between the t18 and the celica very different?

Cheers,
Jase

[ra28sr20]

im not sure

[Smokey228]

Well thanks anyway dude. Worth a shot

[DoctorDubb]

ra28sr20 i havent sorted tailshaft yet, currently it looks like the celica tailshaft will be too long. But as i havent mounted the diff properly yet i cant be sure. The bigger issue is the bolt pattern is different on the tailshaft yoke to the skyline diff, so i was going to attempt to put the rear skyline yoke onto the celica diff. But as i havent got a skyline tailshaft to compare with i dont know if that will work. Keep in mind my gearbox w58 already pushes back the tailshaft a bit so you might be alrite.

Smokey, if you have a t18 trailing arms measurements, ill quite happily measure the celica ra28 arms.

[Smokey228]

Dr Dubb, i got 28 and 23 arms, but dont have t18

[ra28sr20]

Thanks I might go to upull it on the week end and measure the tail shafts to see if u can swap the yoke