i am pretty sure they are the same from the firewall back' any doubts you could measure from underside just need to get access i have a 22 body in driveway but am in nsw. i can measure for you if you need me to hope this helps in some way
Am after some info as to whether there is a difference in the floor pan from the firewall to the rear seat section on a ta22 and ra23.
The reason being my 23 recently suffered a big hit in the drivers side door. It has bent the sill panel and the floor pan so we need to replace that section of the car. If i can find a good 23 section it will be easy but if one from a 22 will do it will make my search a little easier.
Also if anyone in QLD has the need section or a cheap shell with no rust i would like to hear from you. I dont need a door as i have a set of spare doors.
Thanks Nev
Here is a pic of the section i will need to replace.
![]()
i am pretty sure they are the same from the firewall back' any doubts you could measure from underside just need to get access i have a 22 body in driveway but am in nsw. i can measure for you if you need me to hope this helps in some way
I think they are slightly different. Seat rails are not interchangeable.
Doors are the same apart from the intrusion bars in the 23 and not in 22 doors, the sill panels should be the same.
Whats the other door gap like? Has it changed since your crash? If not im amazed, thats a pretty hard hit. Keep us posted with pics etc when your getting it repaired.
Matt
Fark, that must have been scary from the driver seat.
Looks like the sills had a bit of rust in them too!
Norbie!
www.norbie.net
damn mate!... how fast were you going when you hit? dit you have side bars onm the roll cage also?
shit dude thats a big hit
AFIAK they are the same car from bulkhead back
NEV...WTF ....
Dont know if i want ya take me for a spin now...![]()
![]()
Seriously m8, hope ya all right. Have that black 23 in my yard...bring ya grinder and help your self. You may have to help me get the motor out of the black beast first ...then its all yours. Can deliver the section on the back of my ute....pm me if ya lost my number....cheers leso
ps.. i want you to autograph the number thing on your door 4 me to hang in my shed..hehehhhheee
Last edited by leso; 06-08-2007 at 07:28 PM. Reason: more info
No the door gap on the other side is not too bad although i imagine when we unbolt the cage it will be a lot better. As for speed it was doing about 90kmh on impact.
Les pm me your number and i will be in touch. Thanks
What about a 28 sill and floor panel i can't see there been any difference in that area. if not i've got one as well you can cut up.
Cheers
Alex
Bookmarks