DIFF identification

**Muziiz** · 07-07-2007, 03:16 PM

i got a centre for my soarer.

problem is my sideshgafts dont fit it.i counted the splines and come up with 29.im guessing this is for the cressida or mx83 i beleive it is.

can anyone help regarding how do i tell if its for gz series?

thanks

**Muziiz** · 07-07-2007, 03:33 PM

and the crown wheel uses 10 bolts

**madmont** · 07-07-2007, 08:10 PM

Picture ? MX83 has 30 splines . Soarer JZZ has 30 splines. Slightly different though. Both have 10 bolts for crownwheel.

**Muziiz** · 07-07-2007, 08:44 PM

I will recount the splines.but all i know is its not for the jzz30 as the shaft wont even go inside the centre.

**Muziiz** · 08-08-2007, 08:37 PM

Ok i have had the centre looked at and can confirm it is from a mx83 can anyone let me know how much this would be worth? it is a cusco centre.

thanks

**madmont** · 09-08-2007, 06:33 AM

Originally Posted by Muziiz

I will recount the splines.but all i know is its not for the jzz30 as the shaft wont even go inside the centre.

The MX83 shafts I have are the same diameters as the JZZ30 shafts I have here although the spline profile is different. What ratio is stamped on the crownwheel and how many teeth does it have?