swaybar/ARB

[spoon]

I installed a t18 tailshaft in my ke70, it has swaybar mounts but no bar, what swaybars can i put on it, knowing that a t18 diff is bigger than a ae86 s series diff, and different to a ke70 borg warner?

thanks

[bathurst-91]

your tailshaft has swaybar mounts? (im guessing you mean t18 rearend)

im only guestimating here but try an ae86 swaybar

[wraith]

The centre is bigger, but the mounts should be the same. Use a T-18 or '86 swaybar.

ash

[spoon]

oops i mean diff not tailshaft - although it does have a t18 tailshaft!

[takai]

Yes, use AE86 mounts, just cut them off the S-series and weld them on, then fit the AE86 rear sway.

[tin can]

I used the mounts off the ke70 diff and welded the mounts to the t18 diff and used ke70 sway bar

[takai]

Yeah, KE70 bits will do fine, all the running gear is pretty much the same mounting as the AE86 gear. Didnt quite register in the OP that it was for a KE70

[SeptemberSquall]

I installed a t18 tailshaft in my ke70, it has swaybar mounts but no bar, what swaybars can i put on it, knowing that a t18 diff is bigger than a ae86 s series diff, and different to a ke70 borg warner?

thanks

looking for genuine or aftermarket? get a TE72 rear bar, or at a pinch AE86, KE70, etc. bar will fit and probably be exactly the same.

[RobertoX]

I know that some guys have adapted the tercel rear bar which I think is around the 17mm mark to their ke70s... by their reports it does fit but not that nicely, the effect however is pretty good.