Reply With Quotein the second pic, is the front of the alt supported? or is it only bolted to the rear. id be worried that the single mount would crack off.
whats the belt off also?
1jz with no a/c or PS
Just found these old pics of how my engine is setup. Relocated alternator to other side and sliding brackets used. No tensioner pulley in the centre.
P.S yes I know it was dirty
QUICKEST 1JZ'S IN OZOriginally Posted by MR 1JZ
Re: 1jz with no a/c or PS
in the second pic, is the front of the alt supported? or is it only bolted to the rear. id be worried that the single mount would crack off.
whats the belt off also?
hello
Re: 1jz with no a/c or PS
belt would be sized up with a piece of string then walk into bursons etc and match a belt on the slider they have, that how i got my belt when i removed A/C
Re: 1jz with no a/c or PS
That bolt goes from the front of alternator to the mounting bracket as you can see. Underneath is the "slide" bracket which is used to tension it up.
Hasn't cracked so far? Been revved pretty hard.
xistant is correct
QUICKEST 1JZ'S IN OZ
Posting Permissions
Bookmarks