Results 1 to 4 of 4

Thread: lightened flywheel on 3sgte?

  1. #1
    Junior Member Grease Monkey
    Join Date
    Apr 2007
    Location
    ACT
    Posts
    103

    Default lightened flywheel on 3sgte?

    Has anyone put a lightened flywheel on a 3sgte with minimal mods?? what sort of performance increase did you get and how was driveability and idle??

  2. #2
    Junior Member 1st year Apprentice
    Join Date
    Apr 2007
    Location
    NSW
    Posts
    42

    Default Re: lightened flywheel on 3sgte?

    i havent done so as yet but plan to in the very near future with my engine rebuild and twin plate clutch setup.
    I believe you will probably find that the gain wont be anything substantial but it will help the engine rev a little more freely

  3. #3
    My Wife says I have Too Much Toyota o_man_ra23's Avatar
    Join Date
    Nov 2005
    Location
    QLD
    Posts
    6,684

    Default Re: lightened flywheel on 3sgte?

    PitStop is currently doing something like this, but he is also doing a million other improvements, so you wouldnt be able to get a comparison. As gee120 has stated though, the gains are revability, not so much power. The loss though is torque (coasting up hills is harder)

    Cheers, Owen
    Cheers, Owen
    1977 RA28 with 1JZ-GTE (Was 18R-GTE)
    Lancer EVO Brakes into old Celica/Corolla/Corona
    Doing the things that aren't popular... cause being popular and being good are often distinctly different.

  4. #4
    Experience shows I'm no Chief Engine Builder Roundy's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    3,572

    Default Re: lightened flywheel on 3sgte?

    i just recently upgraded my clutch and flywheel.

    It seems to pick up and accelerate a little harder, but nothing startling at all, but then i didn't expect a big difference with the fat pig GT4!

    The difference in idle/driveability is about nil, but mine is harder to get going, but that could be because of going to a button clutch from standard

    also it free revs a lot easier, making heel toeing a bit easier

    Was it worth what it cost me?? Well i was replacing the clutch anyways, and got it all at a (very) good price, but for the $400 the flywheel retails at i wouldn't do it!

    Cheers
    Nathan
    "If you try to fail, and succeed, which have you done?"
    My ST185 with 278awkw (2.2L is running...)
    1:08.08s @ Wakefield 1:37.29s @ Winton
    27.90s @ Esses Hillclimb

Similar Threads

  1. 3SGTE Rwd Starter motor
    By SE86 in forum Tech and Conversions
    Replies: 20
    Last Post: 28-07-2010, 06:59 PM
  2. Lightened Flywheel Thread
    By 1200det in forum Tech and Conversions
    Replies: 101
    Last Post: 05-08-2008, 08:01 PM
  3. 16v 200mm vs 20v Blacktop Lightened 212mm FLYWHEEL
    By Matt-AE86 in forum Tech and Conversions
    Replies: 4
    Last Post: 26-11-2006, 05:18 PM
  4. 20V Lightened flywheel
    By rob20v in forum Tech and Conversions
    Replies: 1
    Last Post: 18-03-2006, 10:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •