Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: TA22 Leaks in Rain

  1. #16
    Senior Citizen Chief Engine Builder "Z" UTE's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    3,059

    Default Re: TA22 Leaks in Rain

    I have used this method quite a few times on different cars to find those elusive leaks. Mix a couple of teaspoons of talcum powder with some metho, spray the solution around the seals. I use an old suction type spray gun, a trigger spray bottle would also work. The metho evaporates, leaving the talcum powder behind. Liberally apply copious quantities of water, walk away, have a cup of coffe/bottle of amber fluid, then check to see where the water has washed the powder off. Adjust windows, replace seals, reseal screens, replace boot seal, whatever it takes to prevent the water getting in.

    cheers Chuck.
    "What man can build, man can fix!"
    MS51Crown Coupe,
    GSV40R Aurion luxo tourer. One TA22 currently receiving some TLC prior to paint One RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. Toyota Crown RS47J ute in need of serious TLC. Toyota Crown Custom Wagon MS53 daily hauler stocko!

  2. #17
    Junior Member 1st year Apprentice
    Join Date
    Feb 2006
    Location
    Queensland
    Posts
    31

    Default Re: TA22 Leaks in Rain

    Might have to try that powder idea.Espacially the amber liquid thing.Getting sme piccies together so will have it up on Member's rides soon.

    Cheers

  3. #18
    Junior Member Grease Monkey Celica_73's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    103

    Default Re: TA22 Leaks in Rain

    Mate my TA22 has the same leak.As Witzl said windscreen Sealant works but I'm guessing it's a rust hole in the bottom corner of your windscreen. I'm currently in the process of repairing my car now. Where is the water dripping if it's on the accelerator pedal as mine was I lay money you have rust.

    All i can recommend is to remove the chrome strip are seem to hold water in there. and run a wide bead of sealant around the screen making sure you seal from the rubber to the car frame. Other option is to remove windscreen and cut the rust out.

  4. #19
    king & queen of cheese Domestic Engineer lilcrash's Avatar
    Join Date
    Dec 2005
    Location
    qld
    Posts
    711

    Default Re: TA22 Leaks in Rain

    one of the very popular leak point is the 2 bolt holes that hold the guard on, make sure that there is bolts in the rear most point, inside the door.
    Looking for a new toy. If you have something 18r powered let me know.

    RIP, where ever you are :- 1974 celica, 3tgte and 186.5hp at 6500rpm

Similar Threads

  1. TA22 + rack and pinion
    By "Z" UTE in forum Tech and Conversions
    Replies: 603
    Last Post: 19-05-2017, 12:02 PM
  2. (TA22) 2T - 2TGEU conversion (now with pics)
    By Invid in forum Engine & Driveline Conversions
    Replies: 30
    Last Post: 13-11-2006, 09:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •