hub conversion for ta22

[Jimmyb]

would any one know of a bolt on hub coversion for a ta22 celica. i want to change the stud size from 4*114 to 4*100

[Javal]

.....why?

10char.

[TRD-12A]

You can buy bolt on spacers they custom make them mag wheel suppliers can get them made for you.

The only problem with he ta22 is the offset aswell so you wil have to get rims that suit the changed offset

[Norbie]

.....why?

+1

If you're going to the considerable effort of changing the stud pattern it would make far more sense to switch to 5x114.3, but even that is dubious unless you have other modifications in mind (eg big brakes).

[SilverRA23]

Sounds like you are putting some lame ass front wheel drive wheels on your car. Don't ruin your '22, you need dish

[Jimmyb]

iam puttn a set of old school dragways that have a bit of dish to them

[SilverRA23]

Old school dragways are nice, so the intent is good! What old school car runs a 4x100 stud pattern?

Might be better off waiting until a set that suits the Celica stud pattern comes up.

Or investigate getting them redrilled. Not sure the legalities of that though.

[roadkill]

Hi,

I think all the old rollas ran a 4x100 pattern. I agree though with just waiting untill the right wheels come up Unless they are stupidly cheap....

bEn

[SilverRA23]

Nope old Corolla's - Ke10-20 - were 4 x 110 which makes them hard to get nice wheels for. Early Mazda's ran the same pattern though.

[roadkill]

Hi,

yup, my bad. what the hell ran a 4X100 then?

Will google it.

bEn

[ill-minded]

don't old gemini's run 4x100?

stick with 4x114.3 though, there's plenty of wheels that suit

[TA22Celica]

yep gemmy's run 4x100