MA70 caliper, to hilux diff bracket

[Bananaman]

Original threads with more detail on what to do for the MA70 gear to work can be found here:
https://r.tapatalk.com/shareLink?url...0&share_type=t
and
http://www.toymods.net/forums/showthread.php?t=2766

Sent from my SM-G950F using Tapatalk

Yes, I used those - just bear in mind the orientation is wrong if using the nissan bracket / caliper.

[andrew_mx83]

Thanks for the feedback bananaman, and also for the link 1jz-rolla. I've been looking for that thread for ages and can never find it!

Any other tips or issues I'll likely run into doing this to a 4x4 diff? Most of the info seems to be around 4x2 diffs. Not sure if there are any other differences around from hub bore and stud count/pcd.

[1JZ~lux]

The 4x4 diff's are practically the same, just the leaves mount on top instead of underneath. Probably just watch the cable and hose lengths in case you need to use longer.

Sent from my SM-G950F using Tapatalk

[andrew_mx83]

Cool, thanks.
I've actually been working on another conversion, with an integrated handbrake. Waiting on parts til i can design the caliper bracket but hopefully it goes ok. If not I'll go the R33/MA70 route as i should already have most of the parts for it