Not sure if this pic will workOriginally Posted by CrUZida
http://forums.toymods.org.au/index.p...tfile&id=10922
I seriously doubt there are only 2 engineers for SA.Originally Posted by barned01
WA has about 20-25, so SA should have even more.
Be smart, call the Trans Dept and talk to someone for some up-to-date information, and not something off a bogan website that probably doesn't get updated very often.
(no harshness intend by this message)
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Not sure if this pic will workOriginally Posted by CrUZida
http://forums.toymods.org.au/index.p...tfile&id=10922
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Worked for me, i just had to refresh it once.
So thats first the hub, then the centre of a MA61 rotor so the handbrake works, then the JZZ30 rotor slipped over the top of the lot?
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
Correct .
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Mr Cruizida you got so much god damn rep! Im running the R32 front set up thanks again!
Wes.
Bitch, come over here and have sex with Charlie Murphy..
Im Rick James bitch!
dude you wouldnt believe it till you see it but i just test fitted the mazda fc caliper to the rear of my z10 and its near perfect.Originally Posted by CrUZida
overkill i know but the fronts will be massif.
parts needed
mazda fc 4 piston calipers x2
r33gtr rear discs x2 300x22mm
spacer x2
the mazda bolt spacing is within 2mm. prob is both caliper and mountplate are throughholes ie no thread, but the mountplate is 10mm, caliper is 12mm so run a 12x1.25mm tap through the mount plate and file the caliper holes slightly and then just sort the handbrake shoes.
ill get whatthe to put some pics up when he brings his camera down.
cheers
linden
Last edited by The Real Roadrunner; 10-07-2007 at 03:24 AM.
Did i read right? FC front calipers on the back of your MZ10??
What you getting for the front?
Any update on this setup linden?
I'd be interested to have a looksee.
1984 MA61 - http://www.toymods.net/forums/showthread.php?t=12340
1972 RT81 - http://www.toymods.net/forums/showthread.php?t=24160
RObErT_RaTh - I think it's fair to say we all love the bush
Viper_Nipplex - If bush is this popular, just wait until the boxes are ready
yes and this is what i have in my rear and can vouch for it's effectivenessOriginally Posted by CrUZida
Man that could be soooo taken out of context...Originally Posted by Ryley
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
still deciding between 343 or 355x32 with some nice brembo calipers.Originally Posted by haison
just waiting for my crown hubs to arrive and ill finish it off and throw some pics up.
cheers
linden
hahahah that is shocking!Originally Posted by CrUZida
going to get me some RDA slotted and EBC greenstuffs to replace my stuffed rotors and unknown pads... i stuffed my old ones on the track!
So I found a guy on eBay selling EBC Redstuff pads pretty cheap, but he only has them listed for the R34 GTT Skyline. Does anyone know if they use the same pads as the R33 GTSt?
Norbie!
www.norbie.net
should be the same but havn't tested, try b+r at CHill for the part no of the 2.
Z32 R32 and R33 are all the same so i would say R34 are also as it looks identical apart from longer legs.
Originally Posted by WHITCHY
just a quick question, where's the best (ie. cheapest) place to get caliper rebuild kits for the Z32 front calipers and the standard ma61 rear calipers? i've been and checked with nissan and they want $180 for a rebuild kit (just the seals) and repco want $200 for the ma61 rebuild kit (though i forgot to ask if that included pistons).
also, does someone know the protex part numbers for the equivalent rebuild kits?
cheers
MA61 rear is:Originally Posted by ill-minded
MCX / Protex K1572S, $15ea last time I got them (They are only dust boots and o-rings, no pistons or slider boots).
Just as a note, the Aus vs JDM rear calipers are different (JDM is larger) so check what piston diameter you have before ordering )
Cheers
Wilbo
Bookmarks