1ggte Gen 3 Turbo Dump Flange Template

**thegreatestben** · 23-05-2007, 01:09 PM

Hey boes,

I've now collected all necessary parts to build a new exhaust for my chaser,
The only thing That has stopped me is that I have a Gen 2 flange which is different to the Flange pattern of Gen 3 turbos.

So Can anyone on here get a template/has a template. I would do it but the motor is all in and its up where its a challenge to reach.

So If anybody could help with this kind request please PM me or reply here.

Gen 2 flange:

**brett_celicacoupe** · 23-05-2007, 02:36 PM

i think i made a rough cardboard template, drew it in cad and then printed it out 1:1 scale and traced it.

its on another computer so wont be able to get it until later.

do you have cad?

**thegreatestben** · 23-05-2007, 02:42 PM

Don't have cad but I'm sure I could sort a copy.
I want to get it done this weekend coming so three days,
Plenty of time.

**hamgatan** · 23-05-2007, 02:51 PM

Originally Posted by thegreatestben

The only thing That has stopped me is that I have a Gen 2 flange which is different to the Flange pattern of Gen 3 turbos.

do you mean the y pipe dumps or the single dump?

the turbo flange is different for the y pipes, but the bottom of the y pipe flange to the single dump is identical.. no difference!

**thegreatestben** · 23-05-2007, 03:01 PM

Hmm maybe I'll double check this I could be mistaken. Was in a bit of a hurry when I checked.

**hamgatan** · 23-05-2007, 03:33 PM

yeah they bolt up perfectly. i just replaced my gen III turbos with gen II ones with a gen II Y pipe in the middle. the only thing that doesnt bolt up is the intake piping to the turbos, as gen II and gen III is slightly different there.. i took to mine with an angle grinder to make it fit