Best place to buy coils for 20v

[vtrfirestorm]

Hello to all, I am in need of some good advise.

I am chasing coils etc to suit 20V running without dizzy.

I have not decided on an EMS yet but i would like to set up the rest.

Q where is the best place to get coils igniters etc?
What other sensors do i need apart from those on the motor. I have read about O2 sensors. do i need this or any others?

I do not have an AFM and will not be running the standard airbox as it does not fit into the KE35 due to fouling the brake MC.

Cheers peter gold coast

[broken22]

Whoever sells you an EMS should be able to supply coils. What are you using for a trigger instead of the dizzy?

[thechuckster]

Decide on an EMS then get sensors to suit. Most new EMS's can use your factory sensors anyway.

Loosing the dizzi will require (at least) a crank trigger and possible a cam trigger (if you want to run true CoP and sequential ignition. At the minimum, a crank trigger and trigger wheel (patterned to suit your EMS) would be required.

See what your EMS manufacturer suggests regarding coils as your ignition setup (waste-spark or CoP) may determine brand and supplier.

Any EMS will need (at a minimum) TPS, Coolant temp, Intake Air temp, crank rpm and MAP (vacuum port that connects to all 4 inlet runners). O2 sensor will be required if your EMS can do closed loop (adjusts fueling during cruise and warm idle to keep combustion close to stoich).

chers,
Charles.

[vtrfirestorm]

Hello bro,

I am using the original crank angle sensor capped off without the dizzy parts only.

cheers peter

[Dom-AE71]

Buy and huyandai coils, look nice, easy mounting as apposed to ulg 4AGZE ones and anywhere that sells haltech gear u should be able to get them for 100 bucks