20v cas

[robakka]

Hey guys i was just wondering what the blaktop 20v uses as a cas.
Is it located on the crank pulley or is it on the dizzy.
Or even better how many times does this get a signal per revolution of the dizzy 1 or 4...

Thanks guys...

[BeRad]

cas being a crank angle sensor, this would mean its on the crank, but if a 20v has a dizzy it uses a dizzy for it, a bit of research will show you how many times a cam spins to 1 revolution of the crank therefore if its on the dizzy it will spin as many times as YOU research a 4 cylinder to turn a cam in proportion to 1 crank revolution. every 4 cylinder is the same and it is not 4 .....

an engine with a cas will NOT have a dizzy and vice versa.

[30psi 4agte]

cas being a crank angle sensor, this would mean its on the crank,
.

Also can be CAM angle sensor on a 4age.

I believe the cas has 24 teeth.

[BeRad]

yes true i spose ahah same as the ca18 etc, ill give you that one

[The Witzl]

If the blacktop is the same as the silvertop.... then all the signals are generated inside the distributor.

There are two signal wheels, and 3 sensors...
- 24 tooth wheel... one sensor
- single tooth wheel... two sensors (180* opposed).

see page 13 of this PDF - http://www.autoshop101.com/forms/h23.pdf

[robakka]

Thank you so very much exactly what i was looking for...
Thanks again....