TA22 X Member Compatibilities??

[TA22 1MZ]

Are there any engine cross members that are interchangable into a TA22? ie. KE, AE corolla?? Any help would be appreciated.

[skiddz]

ra20/21/22..... thats it

moving or making mounts is your only options for anything other than a t or an r engine

[TA22 1MZ]

thanks mate

thought that was the case, just needed a confirmation.

Doing a rack and pinion conversion and just wanted to suss out any possibilities of using a different cross member with rack and pinion a;ready in place, but no real dilemma.

will go with the original plan of swapping the mounts over to my existing cross member.

[TA-022]

for RNP? Find a RNP cross and cut it narrower.

then weld right angles at the ends and redrill to suit .... or sacrifice a 22 cross and chop the
ends off and weld to RNP cross.

Both engineer approved methods if welded nicely.

[TA22 1MZ]

Find a RNP cross and cut it narrower.

then weld right angles at the ends and redrill to suit ....
Both engineer approved methods if welded nicely.

Thanks for the reply mate, going with the above option using ke70. thanks again

[TA-022]

Live and learn I say ... glad I could help.

[rob1]

thought you were selling your car??

[TA22 1MZ]

only half of it