Allo.
I have researched and found the home signal from the dizzy is going to work with E6k- (checked with Haltech them selves). though at the time i didnt have wiring diag to ask how it should be wired.
My example looks wrong, as you have suggested. Do i need it to go to Home for the dizzy or trigger???
with the CAS to the other?
The Hall sensors seem to be 2 types, In some cases, the Hall sensor doesn't produce a voltage signal, instead it pulls a voltage low. In these cases, you will need to attach a pull-up voltage and current limiting resistor to the signal line. You do this with a 5 or 12 Volt source (Haltech will work with 12v source, also the sensor was chosen by them to work with what i have). thank god....
yep the pics are hard to get clearer. if it helps anyone heres the Haltech wiring site to see it clearer. http://www.haltech.com/wp-content/up...6KLoomRevF.pdf
doesnt anyone have their GEU wired to this type of old ECU...if so do you have a wiring diag of yr own to share??? please.
My wife thinks i'm studying for my Masters, with all the info i've printed out on the subject...lol
Bookmarks