why not just remove the speedo sencor from the gearbox and install the original type...mechanical type from the celica?....that way you'll still retain your original speedo.
Im fitting an electronic speedo to my ra23 wi 1ggte, and ive got no idea where to pick up a signal for it(curse you mechanical speedo)-picking a signal out of the existing loom is out cause ive deep sixed it, so all ive got to work with are the original sensors in the engine gearbox-anybody got any ideas. i know thatll it have to come out of the gearbox if anywhere, but all i can find is the reverse switch. is there anything i can do or is it gonna be more pain the arseary
GA23(never finished-now with cracked block) JZX83 (Tyre eater) 3sgte AE86. by now i should know better.
why not just remove the speedo sencor from the gearbox and install the original type...mechanical type from the celica?....that way you'll still retain your original speedo.
!!! BAN LOW PERFORMANCE DRIVERS NOT HIGH PERFORMANCE CARS !!!
私のトヨタはある従って速い均一死んだ人叫ぶ!
The speedometer output from the 1G gearbox is mechanical isn't it?
Teh UZA80 - Project Century - Remotely p00'd by association
please dont tell me that- its one of the things i didnt check before i bolted the engine in for the last time.ill have another look tonight, if its mechanical ill get one of those mech-elec signal converters) cheers
GA23(never finished-now with cracked block) JZX83 (Tyre eater) 3sgte AE86. by now i should know better.
My W58 is from a GA70 Supra with a 1GGTE. Grab a Toyota electric sender, it fits in the same hole as the mechanical one.
Teh UZA80 - Project Century - Remotely p00'd by association
thanx, much appreciate the advice
GA23(never finished-now with cracked block) JZX83 (Tyre eater) 3sgte AE86. by now i should know better.
1989-1993 MX83 cressida grande's have a bolt in electronic speedo sensor.
4 pulses/rev
hello
This man speaketh the truth, and was the one I was talking about.
Teh UZA80 - Project Century - Remotely p00'd by association
Bookmarks