dude rod length has nothing to do with stroke thats the crank that does
but sure put 90mm stroke rods where an 86mm is used, i just wanna see you wreck a 3sge/gte head
can anyone help me i need to know the length of the conrods in the 2s and 3s engines i already know that the 2s stroke is 90 and 3s is 86 so im hoping to sort out a stroked 3s... any help greatly appreciated
dude rod length has nothing to do with stroke thats the crank that does
but sure put 90mm stroke rods where an 86mm is used, i just wanna see you wreck a 3sge/gte head
i know that already im not completely stupid i need to know rod length and piston height so i can figure out how im gonna get correct height. its in a 2s block and im hoping the 3s rods are shorter so ill have correct height with my head swap... stroked 3s lol
or you could put a 5s crank in the 3s block, 2.2l, can buy pistons off the shelf for it (3mm higher pin height is needed)
either way, 3s rods are 138mm long, centre to centre
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
Bookmarks