JDM disc rear end straight fit for aussie sprinter?

[Wanabe_Garage]

Hi

just wondering if the JDM disc rear end straight fit for aussie sprinter?

[Wanabe_Garage]

http://www.ae86drivingclub.com.au/fo...showtopic=7038

[Hibba]

you need the rear part of the tail shaft to go with it. ether a jdm sprinter one, or one out of a T18

[Sprinterboy]

and the hand brake cables..........

[BlueAE86]

Hand Brake Cables will just hook up to the standard ADM ones.

ADM front half of tailshaft and T18 Rear half or find a Full JDM tailshaft for a straight bolt up fittment.

[thanhngo]

There are clamps which you need to relocate as the ADM cables are spaced at a point that won't fit the JDM handbrake cables. Luckily your ADM chassis has the mounts already. You will see what I mean when your under the car.

[parrot]

Though you can just relocate your ADM clamps to the new location which already has the bolt holes.

While you are down there, replace the front short handbrake cable (one that goes to the handbrake lever) with one out of a SV11 Camry otherwise the lever will lift high.

[jimmy_a]

a T-series with discs? as in, out of an ma45?