BA rotor - 325mm diamter, 32mm thick
'E' = 153.8mm
Can someone do me a favour and tell me measurement "E" on the BA disc?
Ta.
The Brembo catalogue says the MX83 is 147.5mm for that measurement.
Just curious if the Falcon is any bigger/smaller/exact same.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
BA rotor - 325mm diamter, 32mm thick
'E' = 153.8mm
Ok cool.
Fair assumption that the 298x28mm disc has the same dimension for E?
Cheers.
Last edited by CrUZida; 23-01-2006 at 02:26 PM.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Which BA rotor is 325mm, i would assume it woudl be one of the FPV vehicles?
-Chris | Garage takai - Breaking cars since 1998
Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence
GT with FPV calipers is 325mm
I'm sure the XR upgrades would be too.
The GTP or the Brembo upgrade package is 355mm
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
It would be close to the same dimension. Why do you need to know? If it is critical I can get you the actual dimension.Originally Posted by CrUZida
Just trying to find out what fits on what.
As long as its not smaller than 144mm we should be cooking with gas.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
They fit on an MZ20 hub fine.
600 Club Member: Toymods Large Member
MegaP00 - 7MGTE Skunkworks division
RIP - Nathan Dean (TA-022)
Ah cool.
BTW, FPV caliper love.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Sweet love -> however the BA falcon standard rotors will hit the steering knuckle. The GT ones have a 20mm smaller hat height and shouldnt be an issue.Originally Posted by CrUZida
600 Club Member: Toymods Large Member
MegaP00 - 7MGTE Skunkworks division
RIP - Nathan Dean (TA-022)
Bookmarks