you haven't actually connected it to ignition, sounds like its just on the acc line.
it needs to be on the ACC + 12V ignition
hey i just installed a Greddy auto turbo timer in my ma61 supra, what would i have wired up wrong if when i set the timer for 30sec i turn key of but the motor turns of like normal? but the cd player and acc power remains going untill the timer countdown reaches 0 then everything switches of?
you haven't actually connected it to ignition, sounds like its just on the acc line.
it needs to be on the ACC + 12V ignition
There could also be 2 wires connected to +12v ignition MA70's have 2 i think as i hooked up the wrong wire to start with on my brothers and it switched the engine straight off aswell
1990 ST185 GT4 3SGTE
1991 ST184 SX 3SGTE
1991 SW20 GT 3SGTE
1998 ST215 GTT 3SGTE
2008 VDJ200 Sahara
well i did notice there was 2 straight 12v power supply's with ignition off.
You want 1 of the wires that only has + 12v with the ignition on.
The wire you want should probably go from the ignition switch to the ignition relay.
1990 ST185 GT4 3SGTE
1991 ST184 SX 3SGTE
1991 SW20 GT 3SGTE
1998 ST215 GTT 3SGTE
2008 VDJ200 Sahara
Bookmarks