Realised it wont work, as the IRS half shafts come out of the image 1 thing.
Anyone know if a Crown F or Tarago F pinion housing will work?
How Strong is a F series Diff?...
Can someone tell me if one of these from a MA61:
(or other F series IRS car, eg RA65, RT142)
Will bolt on to one of these from a MX23:
(or other F series live axle, eg MX22, RA45, Tarago...)
I have a damaged Pinion, so im hoping i can just buy another complete Pinion housing (image 1) and bolt it on (to image 2), instead of having to pull it apart.
Also, is there anything i need to know, such as needing to shorten the drive shaft?
If this doesnt work, can a F series pinion from a MA61 etc, be used in the Live axle housing?
Originally Posted by skiddz
Realised it wont work, as the IRS half shafts come out of the image 1 thing.
Anyone know if a Crown F or Tarago F pinion housing will work?
Originally Posted by skiddz
I reckon a crown one would be fine.
yeah, all F series live axle diff carriers will fit.
p.s. if you get stuck i have a spare complete diff centre from my last MX23
beer me!
Thanks heaps.
I think it will be much easier to find a crown/tarago "diff carrier" then get it posted from tassie
Now i have a good reason to choose a decent crown gear to a nice ratio. (by the looks of my pinion the crown must be damaged too.)
Originally Posted by skiddz
yep,
ma61 hemisphere fits the MX13/23 housing.
im currently running this combo
hello
Brett, when you say hemisphere, are you refering to the diff center?
Originally Posted by skiddz
Originally Posted by Screamn_Sleeka
yeh the centre.
hello
k, well thats clearly not what im asking.Originally Posted by brett_celicacoupe
-Off to find Tarago/Crown diff carrier!
Originally Posted by skiddz
Bookmarks