wolf 3D on 4age 20v

[scrolla]

Just a question to see is it worth buying one, for stock 20v, would it get rid of afm sensor?
It was on a 4agze its V3 comes with looms and relays, would it work on 4age 20v?
Are they any good?

Any answers appreciated,
Thx guys

[4agte]

i would think the relays would be different as the 20v dosent have a supercharger relay

and you might be better off with somehting newer the v3 is getting a bit old in the tooth now

[The Witzl]

for the price a dribbletech (microtech) LT10s is probably the go.... or ask your tuner what they are most comfortable with.

[Hen]

To answer the main questions:

Yes it will (can be made to) work on your 20V

Yes, you will be able to remove the AFM

The loom will not be plug and play. There are a few differences between ZE and 20V (coilpacks vs dizzy, no SC, different ISCVs I think too)

The tune will be wrong (different injector sizes, different cam profiles and different intake restrictions) and it *may* be hard to tune the 20V with quads using MAP. I say *may* as it depends a lot on the tuner, how you connect the MAP signal to the computer and the phase of Jupiter at the time.

Whether it's worth buying it depends on the price. $20 = yes, $800 = probably not, in between you'll have to decide for yourself.

Hen

[The Last Streetfighter]

On sale for around $500.

[jezza323]

also your MAP sensor will be a 2 or maybe 3 bar item, for the 20v you will want a 1 bar item to give u the best resolution, otherwise you are wasting half the available map to an area that will never be reached

[scrolla]

thx a lot for the replys guys,
yes it is for sale for $500 on www.twincam.org if anyone wants
as i wont be getting it, to much mucking around it seems

[datsik]

also your MAP sensor will be a 2 or maybe 3 bar item, for the 20v you will want a 1 bar item to give u the best resolution, otherwise you are wasting half the available map to an area that will never be reached

The wolf has an inbuilt map sensor so no new map sensors are needed.