Different pintle height Q
Hi guys, I have a "set" of 4 x 550cc injectors, which I am planning to use. Having a gander at them, before getting them cleaned and flowed, and 1 injector, has a pintle height of a millimeter, or so less than the others.
This begs the question, will this be a problem?. Do not want to clean 'em and then have to toss them.
cheers Chuck.
"What man can build, man can fix!"
MS51Crown Coupe,
GSV40R Aurion luxo tourer. One TA22 currently receiving some TLC prior to paint One RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. Toyota Crown RS47J ute in need of serious TLC. Toyota Crown Custom Wagon MS53 daily hauler stocko!
Re: Different pintle height Q
Is it just that the cap that sits on the end of the injector is not on all the way ???
Most injectors have a bakelite or steel end cap that surrounds the pintle. This can be removed.
If this isnt on as far as the other injectors and will cause the pintle to be at a different height.
Can you post a side by side pic of the injector in question and the good one.
300+rwkw 4agte http://www.toymods.org.au/forums/for...wkw-4agte.html
Re: Different pintle height Q
a mill is a pretty big differance id make shaw everything was the same even if one was yellow and the rest blue.
i dont have a funny or cool signature.
Re: Different pintle height Q
Could also be seized Chuck?
Lily Simpson 6.7.2010
R.I.P.
Re: Different pintle height Q
Looks like I will have to pull the little festers apart. Valid points from both 30psi, and GT8.
thanks for your help, cheers Chuck.
"What man can build, man can fix!"
MS51Crown Coupe,
GSV40R Aurion luxo tourer. One TA22 currently receiving some TLC prior to paint One RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. Toyota Crown RS47J ute in need of serious TLC. Toyota Crown Custom Wagon MS53 daily hauler stocko!
Posting Permissions
Reply With Quote
Bookmarks