RWD 4age manifold

[45aken]

does anyone know if a company like pacemaker etc make exhaust manifolds for a sprinter? 4age RWD??
thanks

[slide86]

hey mate.
i found the online catalouges for pacemaker and geinie and neither of these list RWD headers for 4age.

they have FWD listings, but i know these wouldn't be any good for your application.

maybe you will have to get some custom made? i have some on my GZE, there is no brand name and they look a bit custom-ish

[The Witzl]

45aken - Anthony Kellam is your man. He has some nice CNR home brand 4-1 madrel bent headers, i used them on the AE71 with great sucess, and loved the sound.

[45aken]

how can i get in contact with him? there about 250ish right?
thanks

[RobertoX]

akellam [at] autospeed.com

[mr2gze]

Hi, another option is SWM they are in NSW aswel, a mate purchased these some time ago.

Extractors - Toyota 4AGE RWD 4:2:1 Mandrel Bends $277.20
@ http://www.swmotorsport.com.au/exhaust.htm

[takai]

Yeah, the SWM ones are good for street use. I prefer the Kellam ones but that is because mine is naturally geared for higher revs. The Kellam ones come out extremely close to the clutch slave as well. So close that if you are running a PBR clutch slave then it wont fit due to a weird casting on the PBR slave. This also cooks clutch lines very easily. I always end up using a braided line and bending the hardline forwards towards the front of the engine bay and then running the line down over the crossmember.

The SWM ones sit a bit further away from memory.

[45aken]

SWM it is then. hopefully they have an O2 sensor built in too.
thanks all

[c2888]

My stew wilkins ones wouldn't fit my 4agze aw11 swapped to rwd because they fould on the alternator, my alt is under the dizzy. Just a heads up if you have the alt there.

And no bung in mine, although i got them years and years ago. My ant kellam ones don't have the bung either, but they are old too. Maybe they do now, anyone got bungs?

dan

[takai]

Nope, no bungy here. Only 1 year old lah