Originally Posted by
-NiCkeL-
That is one document I know of... i'll look for more later, I better start work.. lol
Customer Service Documents
.................................................. .................................................. ............................
Engine replacement
A vehicle fitted with a non-standard engine is considered to be modified and must comply with guideleines issued by VicRoads in accordance with 819 of the Road Safety (Vehicles) Regulations 1999. They are divided into three categories.
Category 1 replacements
Category 1 replacements
Engine replacements in this category are a repair, not a modification. They are a reconditioned or replacement engines of the same make, capacity and type, including number of cylinders and induction system, as the engine it replaces. The only significant change is the engine number.
Note: Carburettors, fuel injection systems or turbo chargers are all part of the induction system and whatever was on the original engine must be on the replacement engine.
Technical requirements:
The engine must be correctly fitted, with all polluting control equipment and other fittings connected. A certificate or report is not required.
The vehicle must be presented at a VicRoads Registration and Licensing office for a change of engine number to be recorded.
Category 2 replacements
Category 2 replacements
Engine replacements in this category are generally a modification. They are:
a) Engines different to that replaced but of a specific type offered by the vehicle manufacturer as an option for the vehicle model concerned, or
b) Engines which are not of the same type and/or make as those replaced or offered as an option by the manufacturer of the vehicle concerned, but are equivalent in general configuration, power, mass, and emissions standard to that of the original or an optional engine for the vehicle model.
Note: It is very unlikely that many vehicles apart from heavy goods vehicles would have a replacement engine of this type.
Technical requirements:
All related components including:
i) general structure, reinforcement, suspensions, brakes, drive lines, etc., must be equivalent to those fitted to vehicles of the same model supplied with the engine type concerned as optional original equipment by the vehicle manufacturer.
ii) acceptable evidence must be supplied certifying that the above components are fitted and the vehicle in its modified form is safe and complies with the applicable mandatory requirements for that vehicle model.
Acceptable evidence for this type of engine replacement is:
a) a completed declaration signed by either a motor mechanic, an automotive engineer or a person with similar qualifications; or
b) a letter or certificate from an authorised dealer for the make of vehicle concerned, certifying that the modified vehicle meets all applicable requirements; or
c) an engineer's report.
Category 3 replacements
Category 3 replacements
Engine replacements in this category are a modification. They are:
engines which are different to any offered by the manufacturer of the vehicle as an option for that model;
engines which have a capacity or power of more than 10% above the largest option engine for that vehicle;
engines which have been extensively modified or fitted with a turbo charger;
engine replacements which have required extensive modifications to the vehicle to allow the engine to be fitted, such as cutting and welding sub-frames or fabricating engine mountings to accomodate the replacement engine
Technical requirements:
An Engineers Report must be provided, including evidence that the vehicle in its modified form is safe and meets all constructions and emission control requirements applicable to the vehicle model concerned.
Emission requirements
Emission requirements
Passenger vehicles built on or after 1 July 1976 were required to comply with the applicable ADR which contained quite strict emission requirements. These requirements became tighter with the introduction of further ADRs.
1 July 1976: introduction of ADR 27 (A) for emission requirements
1 January 1982: introduction of ADR 27 (B)
1 January 1983: introduction of ADR 27 (C)
1 January 1986: vehicles built on or after this date were required to run on unleaded petrol and comply with ADR 37 or ADR 37/01 as applicable
1 February 1986: introduction of ADR 27 for emission requirements
Considerations
Considerations
Red Holden engines: Customers will say they have replaced a red Holden engine with another red Holden engine. These engines are not necessarily identical. Red engines were built from about 1963 to 1980 in various sizes and to meet different emission requirements.
250 Falcon engines: Ford produced the 250 engine from early 1970 to well into the 1980s. The engines were the same size but was redesigned a number of times to meet different emission requirements. These changes also resulted in much higher power outputs.
Always check the date of manufacture of the replacement engine. Generally it should be from a vehicle in the same model range or newer. If a newer engine is fitted to a vehicle manufactured on or after 1 July 1976 any pollution or engine control equipment for that engine must be retained (eg computer controlled catalytic converter). Where it is intended to fit an engine which has been designed to meet earlier or later emission requirements than those applicable to the vehicle, the customer should be reminded that the EPA has requirements which must also be complied with and for further information and a copy of the EPA Modified Vehicle Guidelines they should contact the EPA.
There may be more to the modification than just changing the engine such as brake change, suspension change, rear axle changed, turbo charger fitted.
LPG
LPG
Vehicles built before 1 January 1986 can be converted to run on LPG or CNG without any restrictions apart from having to comply with the applicable Australian Standard 1425.
Vehicles built on or after 1 January 1986 converted to run on LPG, CNG or dual fuel must retain all the emission equipment and meet the emission requirements that apply to that vehicle.
Associated Links
PARS
Approved on 10/11/2004
Disclaimer
VicRoads does not warrant; guarantee or make any representations regarding the currency; accuracy or correctness or any other aspect; of the material presented in this information sheet. By using this material you accept sole responsibility and all risk for its use and VicRoads does not accept any liability for any loss or damage which you may incur as a result of that use.
Bookmarks