i had looked into this breifly and actually bought a stuffed 2zzge motor as an experiment.
i didn't get to far but i found a couple of things.
1.There is no provision on the exhaust? side of the block for a engine mount, i did have thoughts of making some sort of cradle for it but like i said i didn't get that far.
2.you'll have to get a remote oil filter setup because the oil filter points straight down and would foul on a rwd crossmember.
3.the input spline is the same as a ae86 t50 gearbox which means you may be able to use a factory 2zz clutch if you use a t50 gearbox.
4.the usual cut and shut inlet manifold jobbie
5.no distributor so thats atleast 1 good thing!
6.it has a 'front sump'
I remember someone in the US doing this but can't remember the link, sorry.
Bookmarks