Results 1 to 5 of 5

Thread: Aw11 n/a c52 driveshaft Question

  1. #1
    Junior Member Domestic Engineer Alex's Avatar
    Join Date
    Aug 2006
    Location
    vic
    Posts
    531

    Default Aw11 n/a c52 driveshaft Question

    Does anyone know if there are any corolla shafts that are a interchangeable to an aw11 n/a c52,

    or how much roughly it costs to get mine reco'd?

    or does anyone have any they want to sell (Melb)
    Cheers.

  2. #2
    Toymods Club Member Too Much Toyota TooF's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    5,741

    Default Re: Aw11 n/a c52 driveshaft Question

    last set of E51 shafts i had recod cost me about $140 each.

    they didnt haven listings on them but they interchanged with the st185, they did however have listings for the n/a c52 shafts. i couldnt imagine they woould be much/any more to rebuild.

  3. #3
    Junior Member Domestic Engineer Alex's Avatar
    Join Date
    Aug 2006
    Location
    vic
    Posts
    531

    Default Re: Aw11 n/a c52 driveshaft Question

    Thanks Toof, that does'nt sound to bad for rough price.

    There must be a corolla model that is the same as aw11 (you'd expect)
    I'm happy to get mine reco'd but if I can get another pair of shafts for spare, I won't have to be without my car whilst the shafts are out getting reco'd

  4. #4
    That's me before i was a Conversion King -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,445

    Default Re: Aw11 n/a c52 driveshaft Question

    I'd say ae82 and ae92/3 at a guess.
    AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
    1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
    Toymods Club Member

  5. #5
    Junior Member Domestic Engineer Alex's Avatar
    Join Date
    Aug 2006
    Location
    vic
    Posts
    531

    Default Re: Aw11 n/a c52 driveshaft Question

    That would be my best guess also, if I have no luck from anybody here, i'll just have to try with comparing those models myself when i get ahold of some.

    I will let everyone know how it goes when i get on to it, which I think wont be too long by the sounds i'm getting from my shafts

Similar Threads

  1. AE86 - AW11 parts compatibility?
    By Stomp86 in forum Tech and Conversions
    Replies: 7
    Last Post: 25-08-2006, 09:19 AM
  2. Aw11 4agte
    By mr2janai in forum Tech and Conversions
    Replies: 6
    Last Post: 19-08-2006, 07:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •