1ggte distributor

**celicapain** · 19-02-2007, 11:14 AM

Hey simple question, doesanyone know whether a 1ggte distributor rotates clockwise or anti clockwise?

**stradlater** · 19-02-2007, 11:17 AM

I can check, but I don't remember. Has Jerry asked?

**celicapain** · 19-02-2007, 11:28 AM

yeah he has. and i got no idea. i think its anti-clockwise but im not sure.

**stradlater** · 19-02-2007, 11:43 AM

I'm actually gonna go clockwise on this one... But I'll have to check.

Slightly OT, what's Jerry making for you?

**stradlater** · 19-02-2007, 11:53 AM

Check this pic out.. Whilst this isn't a 1g dizzy, it is in a 1g head, which means it'll spin the 1g way. I'm certian it's clockwise.

http://i29.photobucket.com/albums/c2...2/RIMG0053.jpg

**celicapain** · 19-02-2007, 02:25 PM

I had a chat to him today and it sounds like he wants to use the standard shaft and housing and just put a vac/boost servo in it. Thats as well as putting a optical pickup in it so when i finaly have the moolah to organise a puter for it, ill have half a chance of getting it hooked up without having to sacrifice my family to the gods of ignition timing.

Is that a chrysler dissy?

**stradlater** · 19-02-2007, 04:18 PM

I'd be getting him to change the cap and rotor setup too while he's there, because getting it to fire with an aftermarket computer can be a kent....

But yes, using the standard housing and shaft is a good idea, the servo inside with the pickup is a good idea too.

Just make sure he puts a 6 tooth hall effect sensor in it rather than a 1 tooth.

The one in the pic is a 5m dizzy, I've got a chrysler dizzy setup.