Results 1 to 7 of 7

Thread: g series weighs how much???

  1. #1
    Junior Member Automotive Encyclopaedia 2jzhilux's Avatar
    Join Date
    Nov 2006
    Location
    wa
    Posts
    829

    Default g series weighs how much???

    as the title says how much does a g series centre weigh just trying to find out to see if aust post will send one will it be under 20kgs???
    thanks

    ps i have searched with no luck
    Last edited by 2jzhilux; 05-02-2007 at 12:40 AM.

  2. #2
    Toymods Club Member Backyard Mechanic Big T's Avatar
    Join Date
    Aug 2005
    Location
    NSW
    Posts
    231

    Default Re: g series weighs how much???

    If it's only the centre, no hemisphere/CW&P, it shouldn't come to more than 10kgs. An LSD centre will weight a couple kgs heavier than an open one. Either one will be less than 20kgs though.

    Eddie.
    4agte finally completed. 234rwkw @ 8125rpm. Tis fun

  3. #3
    User Conversion King
    Join Date
    Oct 2005
    Location
    NWA
    Posts
    2,885

    Default Re: g series weighs how much???

    i have sent a cressida 4 pinion LSD from townsville to perth, via aus post.

    i think it was about 15-19kg?
    hello

  4. #4
    Junior Member Domestic Engineer
    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    Default Re: g series weighs how much???

    hilux centre including pumpkin, centre, and cw&p was over 20KGs i think it was closer to 25 when i got one shipped over from Sidenee.
    I ended up using a transport copmpany, cost close to 75 dollars for shipping.
    should have worked that out before i bid on it on ebay lesson learnt.
    here try this thread for shipping companies and ideas
    http://www.toymods.net/forums/showthread.php?t=8005
    Last edited by barned01; 05-02-2007 at 11:22 AM.

  5. #5
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: g series weighs how much???

    i know not G series, but 4 pinion TRD LSD for T series is about 5-6kg, and the crownwheel and pinion also weight another 5kg or so.
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  6. #6
    User Conversion King
    Join Date
    Oct 2005
    Location
    NWA
    Posts
    2,885

    Default Re: g series weighs how much???

    Quote Originally Posted by oldcorollas
    i know not G series, but 4 pinion TRD LSD for T series is about 5-6kg, and the crownwheel and pinion also weight another 5kg or so.

    kingmick type post FTL


    G series are waaaaaaaaaaaaay heavier then T series



    following on from my other post, that was minus the crown wheel


    the whole centre carrier, complete including centre and gears and stub axles was a round 40kg
    hello

  7. #7
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: g series weighs how much???

    Quote Originally Posted by brett_celicacoupe
    kingmick type post FTL
    dammit, i'm slipping

    i thoguht the axles were stupidly heavier, but wan't sure abot the LSD centre (so just putting relative numbers out there.. ie, it MUST be heavier than this... )
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

Similar Threads

  1. ST162 - Installing Series 1 rear struts into a Series 2
    By RobST162 in forum Tech and Conversions
    Replies: 4
    Last Post: 26-10-2006, 12:51 PM
  2. What torsen center is this? (10 bolt)A or G series? Pics**
    By 07XTC in forum Tech and Conversions
    Replies: 6
    Last Post: 29-12-2005, 06:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •