Reply With QuoteDONT PANIC
it appears that there is a "fuel pressure pulsation damper" (that i dont have) from the 3tgteu and the 4ageu that can be fitted so long as you use the 'banjo' type fuel line fitting
cheers
phill
18R-GEU Fuel Rail-fuel line
people i have a problem
after taking out the motor to change the rear main seal i noticed my fuel line attached to the rail was dodgey (to say the least) so i took it off to have a look... it is stuffed and not in a good way. what i'd like to know is...
Is there another motor whos fuel line can be retro fitted to teh 18RGEU? (its the bit that screws into the fuel rail, high pressure)
cheers
phill
ON HOLD Current Project 1UZ-FE Powered Buggy
Last Project 18R-GEU time to tinker
EDITED ITS ALL VERY LAMO
Re: 18R-GEU Fuel Rail-fuel line
DONT PANIC
it appears that there is a "fuel pressure pulsation damper" (that i dont have) from the 3tgteu and the 4ageu that can be fitted so long as you use the 'banjo' type fuel line fitting
cheers
phill
ON HOLD Current Project 1UZ-FE Powered Buggy
Last Project 18R-GEU time to tinker
EDITED ITS ALL VERY LAMO
Re: 18R-GEU Fuel Rail-fuel line
you can probably use many more models also...
i used 3SFE damper and maybe 4A? bajo on my 7KE rail... mix n match
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
Re: 18R-GEU Fuel Rail-fuel line
3tgteu 4ageu 18rgeu have the same fuel pressre damper
cheers
phill
Last edited by scootaphill; 15-01-2006 at 10:33 PM. Reason: part number added
ON HOLD Current Project 1UZ-FE Powered Buggy
Last Project 18R-GEU time to tinker
EDITED ITS ALL VERY LAMO
Posting Permissions
Bookmarks