CoolingPro 600x300x76 INTERCOOLER WITH 3 INCH INLETS

[CHB]

any one use one of these intercooler? i'm going to import some from ebay so wonder about the comments from the users...
here is the link
http://cgi.ebay.com.au/CoolingPro-60...QQcmdZViewItem

[Bored?]

They are almost all made in china, so you might be better off getting one locally or importing some yourself if you're in malaysia.

Intercoolers are intercoolers. There might be a little difference in efficiency between core types, but they all do basically the same thing.

[Rosie]

Agree - go local if u can but for a starlet u don't need one that big, look for somethin smaller that would be easier to install, 300 or 400 x 300 x 75 would have plenty of cooling capacity and save u money, bar and plate or tube and fin doesný really matter for your application, cheers Rosie.

[-==L=a=N=c=E==-]

The JustJap/CP/Chinese copy intercoolers do the job nicely. And not to mention are very very cheap.

Cause you are in Sarawak, i'd suggest ringing the performance shops in and around KL to find an intercooler. Short of actually buying it direct from china to begin with.

[CHB]

ok cheers mate...

[aristo_newy]

Agree - go local if u can but for a starlet u don't need one that big, look for somethin smaller that would be easier to install, 300 or 400 x 300 x 75 would have plenty of cooling capacity and save u money, bar and plate or tube and fin doesný really matter for your application, cheers Rosie.

bigger is always better
I have seen these coolers get 2- 300kw with no problem the core heat doesnt get 1/4 across the sore sitting idle in traffic or the hottest days

[BeRad]

agreed i have a china cooler haha, was getting 29c air temps on a 23c night which aint to bad for 160 dollars delivered, gets condensation on one side, so it cant be doing to bad

[psi999]

Got one on my pulsar, great bit of gear for the price!

[Rosie]

just assumed this was going on a starlet, daily driver? Is up to you tho, but think there is no advantage having a 600 compared to a 300 in this applicaction. But if thats what you want then go 4 it, price is pretty good too for that size.

[JustCallMeOrlando]

Josh (emp?) makes over 300rwkw with the 450mm version. I'd say one of the smaller ones would suit you fine.

[CHB]

yeah as i accumulate part for my project 3TC turbo KP61. it may cost twice as much for the same size if i get it from dealers in Malaysia. that y i prefer to buy it in Aussie..
currently the 3TC combo is in Mazda 808 chassis as u all can see here http://www.cardomain.com/ride/2200750
i'm doing upgrading on turbo right now and may be will move the whole thing over a KP61 or a KE70.

[SillyCarS]

justjap intercoolers

edit: where is sarawak, yeah others i recommend just jap as well

[CHB]

Sarawak is one of the state of Malaysia. its located at the East Malaysia.

[SillyCarS]

Cool. Of the topic, a good friend of mine josh is from malaysia, he lives in quala lumpur, his mother is the head of the board of justices. Im prob going over to visit him sometime before uni starts if i can come up wit the airfare... Malaysia sounds great and then even better due to the exchange rate, now i understand why your having a bit of hartache with the price of overseas coolers

craig

[BeRad]

be better to swap some parts or something to someone in exchange for a cooler...