Can't say for sure, but probably whatever is listed for a manual 7M?
im doing a manual conversion on my mz11 with a 6mge and was wondering what flywheel bolts should i use for my conversion?
is there a part numbrer some one can give me or is it a general part i can pick up that is interchangable with other manual toyota's?
thanks.
Can't say for sure, but probably whatever is listed for a manual 7M?
Yes, same bolts as a 7M engine. You can buy them new from Toyota, or use the ones you have now, as I think there the same between manual and auto. Although, new bolts are recommended.
just go get some high tensile bolts from a fasteners shop or go to a auto shop repco,supercheap etc they sell bolts in packets of 4 just get the right thread and size
Sure the manual ones aren't longer??..
I can't say for sure, but I know the 1G bolts are the same between auto and manual. The auto just has spacer rings on each side of the flex plate which makes up some thickness that a flywheel has.Originally Posted by mrshin
Yep they are longer than auto ones.Originally Posted by mrshin
EPC says Part number: 90105-10042, flywheel bolt set of 6. (M series seems to be the same as A series (6 bolt) and Y series...)
TSRM says torque to 54ft-lb. or 74Nm.
Cheers
Wilbo
I wouldn't recommend buying a set of random bolts unless you happen to know the precise specifications of the factory bolts. This is one area where you don't want to be cutting any corners IMO.Originally Posted by sam-131
Norbie!
www.norbie.net
Thanks for the feed back guys.
Ill have to find some Toyota parts supplier tomorrow and give them a call.
Ill ask for 5mge manual flywheel bolts, ill find out if there the same as A and Y series bolts
For your reference.
maybe a better question is... anyone know a good place for toyota parts in Brisbane?
Bookmarks