Jaycar Kit: Digital Fuel Mixture Display (setup help?)

[RObErT_RaTh]

Hi guys,
I just bought a second hand Digital Fuel Mixture Display by Jaycar but I don't have any instruction sheet with it. I was curious if anyone had a sheet and could email me some pics or link me to a site with some detailed info on the kit and how to calibrate it? I've been looking around on silicon chip and other random sites but nothing really helping yet Any help would be greatly appreciated (ie rep given ) Thanks guys

PS, here's the kit:
http://www.jaycar.com.au/productView...Max=&SUBCATID=

[river]

Hi,

Is it a Silicon Chip design? If so, and depending on how old it is, I might have the magazine it came out of and should be able to scan it.

seeyuzz
river

[RObErT_RaTh]

Hi,

Is it a Silicon Chip design? If so, and depending on how old it is, I might have the magazine it came out of and should be able to scan it.

seeyuzz
river

Yes it is, got the silicon chip stamp on the bottom right. Would be great if a scan of the article was possible. Thanks I'd really appreciate it

[river]

Hi,

Dunno if my mags go back that far... they should. I'll check through them tomorrow.

If I don't have it and no one else does, or if no one else has the same unit and can help, you can go to the Silicon Chip website and request a copy of the article.

http://www.siliconchip.com.au/

Anyway, I'll have a look tomorrow. I need my sleep and want to cuddle upo with Riverina for a bit.

seeyuzz
river

[RObErT_RaTh]

Thanks mate, I'll wait to hear from you tommorow if you do manage to find it. Here's what I've found so far:
http://www.siliconchip.com.au/cms/A_103609/article.html
http://www.siliconchip.com.au/cms/A_103710/article.html

[ViPeR_NiPPleX]

Two wires for power (+12v and Ground) and another wire for the narrow band sensor. Pretty simple little jigger, my dad made one ages ago.... just make sure it's calibrated.

If you need the doccos for it, i'll see if i can dig em up.

[RObErT_RaTh]

Two wires for power (+12v and Ground) and another wire for the narrow band sensor.

Yup, knew that bit I'm not just a pretty face

just make sure it's calibrated.

Here is where I need the instructions

If you need the doccos for it, i'll see if i can dig em up.

That would be really appreciated, thanks mate

[river]

Hi,

Okay dokey... I hunted through my vast library of electronics magazines and I got them.

Now, do you want the entire article scanned, or just the calibration bit?

Also, you better PM me your email addy so I can send them to you.

seeyuzz
river

[ViPeR_NiPPleX]

oh thank heavens, river to the rescue I didn't like my chances of finding em

[RObErT_RaTh]

Sending pm now river, thanks for your help guys

[ra65]

Can you post it up on the thread if possible?

[river]

Hi,

Okay, here are the scanned images.

I assume, maybe incorrectly, that these are okay to display - as the instructions on their own are pointless unless you have the actual unit. Furthermore, it uses a PIC and it is loaded with propretary code, which isn't listed here. If there's a problem with this then please let me know and I will remove them.

There's 12 pages all up, so it will need two posts. I usually trim the image, but I was a bit slack and that's why you see black oines at the top and/or side - but all the info is there, and appears to be readable.

Page 1


Page 2


Page 3


Page 4


Page 5


Page 6


Page 7


Page 8


seeyuzz
river

[[email protected]]

let me know if it works for ya rob it was wired up in my car but not set up...just like the intercooler and everything else...he sure liked the wank factor....without the actual wank of it lol

[river]

Hi,

Alrighty then, here's Part 2.....


Page 9


Page 10


Page 11


Page 12


That's it. I hope it helps you and get's your unit working.

seeyuzz
river

[RObErT_RaTh]

let me know if it works for ya rob it was wired up in my car but not set up...just like the intercooler and everything else...he sure liked the wank factor....without the actual wank of it lol

Will do mate

And River, thankyou SO much for this I really appreciate it! Much rep to you