Thoughts and opinions on VT/VZ commodore calipers

[BlackSupra]

As stated in title.

Now sure i know they aren't going to be the greatest thing on the face of the plannet but the R33 4 potters foul the back of the my rims and will be quite difficult to make these fit.

So i need something slimline. (measured R33 brembo and EVO 7 brembos and JZA80 4 potters and they also don't fit)

Was just wondering on peoples opinions of these 2 pots?

This is meant to be an upgrade for a Z20 soarer with 300x22mm rotors and a single pot caliper.

Can anyone suggest an alternative in a toyota 2 potter that may supass the commonwhore parts?

[CrUZida]

First step would be to find out if they fit over 30mm discs.
They are made for 28mm discs.

I know you'd be struggling to get the 30mm Z32 calipers over 32mm discs.

[CrUZida]

Ok, the 296mm dics is 28mm thick, but the HSV 330mm ones are 32mm thick.

Get some of those calipers.

[Cool1]

How bad do the R33 calipers foul your wheels? You could try RX7 calipers as these are a tad more slim!